NXG Stereo Volume Controls
NX-VM803C
80-Watt Impedance Matching Stereo Volume Control
- Switchable impedance matching allows you to connect up to 16 pairs of 8-ohm speakers to a single amplifier
- Adjustable for 2 to 16 speaker pairs
- Soft-touch, 12-step attenuation
- Removable terminal blocks accept up to 14-gauge wire
- Frequency response: 20Hz-20kHz
- 1 5/8" Wide x 2 7/8" High x 2 2/3" Deep
- Includes white, ivory, almond color kits, decora-style insert, trim plate and knob
- NX-VM803C - 80-Watt Volume Control - MSRP $ 39.95
- Also available KP2-BLACK - Black Trim Kit (Plate & Knob) - MSRP $5.95
NX-V703C
70-Watt Stereo Volume Control With 3 Color Kits
- Redesigned, smaller control with soft-touch 12-step attenuation
- Removable terminal blocks accept up to 14-gauge wire
- Frequency response: 20Hz-20kHz
- 1 5/8" Wide x 2 7/8" High x 2 2/3" Deep
- Includes white, ivory, almond color kits, decora-style insert, trim plate and knob
- NX-V703C - 70-Watt Stereo Volume Control - MSRP $ 29.95
- Also available KP2-BLACK - Black Trim Kit (Plate & Knob) - MSRP $5.95
NX-VMS1003C
100-Watt Sliding Volume Control With 3 Color Kits
- Switchable impedance matching allows you to connect up to 16 pairs of 8-ohm speakers to a single amplifier
- Stereo non-impedance matching 1x position
- Soft touch 12 step slide attenuation
- Removable terminal blocks accept up to 14-gauge wire
- Mounting requirements: fits all single gang backless P-rings or 18 cubic inch minimum electrical work box
- Frequency response: 20Hz-20kHz
- 1 5/8" Wide x 2 7/8" High x 2 2/3" Deep
- Includes white, ivory and almond color kits
- NX-VMS1003C - 100-Watt Volume Control - MSRP $49.95
NX-AB2
100-Watt In-Wall 2-Source Switcher With 3 Color Kits
- Switch between 2 amplifiers and 1-pair of speakers or 2-pairs of speakers and 1 amplifier
- Compatible with any speaker and/or volume control combination
- 100-watt power handling
- Includes white, almond and ivory insert and button color change kits
- NX-AB2 - 100-Watt In-Wall 2-Source Switcher - MSRP $38.95
NX-SS4
4-Zone Speaker Selector With Automatic Overload Protection
- Power handling: 100 watts RMS per channel
- Removable screw type connectors accept 14-gauge wire
- Automatic impedance protection circuitry
- Frequency response: 20Hz-22kHz
- Dimensions: Width 11.5", Height 1.875", Depth 7"
- Includes room labeling system
- NX-SS4 - 100-Watt 4-Zone Speaker Selector - MSRP $59.99
NX-SS6
6-Zone Speaker Selector With Automatic Overload Protection
- Power handling: 100 watts RMS per channel
- Frequency response: 20Hz-22kHz
- Removable screw type connectors accept 14-gauge wire
- Automatic impedance protection circuitry
- Dimensions: Width 11.5", Height 1.875", Depth 7"
- Includes room labeling system
- NX-SS6 - 100-Watt 6-Zone Speaker Selector - MSRP $79.99
NX-SSVC6
6-Zone Speaker Selector With Individual Volume Controls
- Power handling: 100 watts RMS per channel
- 12 position volume controls with 42dB attenuation
- Automatic impedance protection circuitry
- Individual on/off zone switching
- Removable screw type connectors accept 14-gauge wire
- Width 16.75", Height 2.125", Depth 11"
- Frequency response: 20Hz-22kHz
- Includes room labeling system
- NX-SSVC6 - 100-Watt 6-Zone Speaker Selector - MSRP $259.99
NX-IMH12
Impedance Matching Audio Distribution Panel
- 12-zone, 200 watts stereo audio distribution panel
- Resistor based automatic impedance matching delivers wide dynamic range
- Isolated left/right circuit ground provide safe connections for amplifiers with floating grounds or bridged configurations
- Detachable screw-type connectors accept up to 12-gauge wire
- High-quality heavy-duty painted steel cabinet with ventilated cover for improved heat dissipation
- 3/4" and 1/2" cable/conduit knockouts allow for easy wire routing to all connectors
- Cabinet may be surface, side, or flush mounted
- Designed for use with class 2 wiring
- Width 9.562", Height 12.25", Depth 3"
- NX-IMH12 - Audio Distribution Panel - MSRP $249.95
NX-VCH8
150-Watt Volume Control Distribution Hub
- Detachable Parallel connecting block for use with impedance matching volume controls
- 1 stereo input, 8 stereo outputs
- Compact size fits standard structured wiring panels
- Supports up to 14 gauge wire
- Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds or bridged configuration
- 150 watts RMS per channel (suitable for use with 300 watt per channel rated receivers/amplifiers)
- Width 6.88", Height 3.93", Depth 1.19"
- NX-VCH8 - Volume Control Distribution Hub - MSRP $49.95
NXG Universal LCD/Plasma Television Mounts
Available in 3 sizes to fit most Flat Panel Televisions
NX-G80FT
23" to 42" Fixed Flat Panel Mount with Tilt
- Low-profile design fits most flat panel TVs 23" to 42"
- Weight capacity: 80 lbs.
- Universal VESA 300mm x 400mm compatibility
- Sliding lateral on-wall adjustment and endcaps for clean side view
- Lift n' Lock™ for easy installations
- UL approved
- Durable black powdercoat finish
- NX-G80FT - 23 to 42" TVs up to 80 pounds - MSRP $79.95
NX-G125FT
37" to 63" Fixed Flat Panel Mount with Tilt
- Low-profile design fits most flat panel TVs 37" to 63"
- Weight capacity: 150 lbs.
- Universal VESA 400mm x 600mm compatibility
- Sliding lateral on-wall adjustment and endcaps for clean side view
- Lift n' Lock™ for easy installations
- UL approved
- Durable black powdercoat finish
- NX-G125FT - 23 to 42" TVs up to 150 pounds - MSRP $99.99
NX-G200FT
42" to 70" Fixed Flat Panel Mount with Tilt
- Low-profile design fits most flat panel TVs 42" to 70"
- Weight capacity: 200 lbs.
- Universal VESA 400mm x 800mm compatibility
- Sliding lateral on-wall adjustment and endcaps for clean side view
- Lift n' Lock™ for easy installations
- UL approved
- Durable black powdercoat finish
- NX-G200FT - 42 to 70" TVs up to 200 pounds - MSRP $119.95
HDMI Splitters & Switchers
NX-HDMI18
High-Performance 1 x 8 HDMI 1.3b Splitter
- Splits 1 source into 8 destinations
- Splitter/switcher for the new generation of HDMI digital displays and AV sources
- Outputs 1080p signal up to 12m without additional amplification in use with NXG HDMI cables
- HDMI 1.3b compliant
- Blue LED indicators identify which outputs are connected and ready to receive signals
- Hot Plug Detect (HPD) for auto switching
- HDCP and RoHS compliant
- Includes remote control and AC/DC adapter
- NX-HDMI18 - 1 x 8 HDMI 1.3b Splitter - MSRP $599.99
NX-HDMI51
High-Performance 5 x 1 HDMI Switcher
- Switches 5 sources into 1 destination
- Supports 720p, 1080i and 1080p signals
- HDMI 1.3b compliant
- HDCP and RoHS compliant
- Automation system control via IR remote
- Automatically selects the device based on the last signal received
- 6 11/16" Wide x 1 7/16" High x 3 3/4" Deep
- Includes remote control and AC/DC adapter
- NX-HDMI51 - 5 x 1 HDMI Switcher - MSRP $179.99
NX-HDMI31
High-Performance 3 x 1 HDMI Switcher
- Switches 3 sources into 1 destination
- Supports 720p, 1080i and 1080p signals
- HDMI 1.3b compliant
- HDCP and RoHS compliant
- Automation system control via IR remote
- Automatically selects the device based on the last signal received
- 6 11/16" Wide x 1 7/16" High x 3 3/4" Deep
- Includes remote control and AC/DC adapter
- NX-HDMI31 - 3 x 1 HDMI Switcher - MSRP $149.99
HDMI Wallplates
NX-HDMIWP2
HDMI Dual-Jack Single-Gang Wall Plate
- HDMI certified connectors
- Fits standard single-gang box
- Decorator-style white wall plate
- Dual port
- 1 5/8" Wide x 2 7/8" High
- NX-HDMIWP2 - Dual-Jack HDMI Wall Plate - MSRP $24.95
NX-HDMIWP1
HDMI Single-Jack Single-Gang Wall Plate
- HDMI certified connectors
- Fits standard single-gang box
- Decorator-style white wall plate
- Single port
- 1 5/8" Wide x 2 7/8" High
- NX-HDMIWP1 - Single-Jack HDMI Wall Plate - MSRP $14.95